Wunschzettel
Bionix-P120-ARGB-PST-Icon

BioniX P120 A-RGB

120 mm A-RGB PWM Fan with Cable Splitter

Choose variant

Controller
Variant

A-RGB for Full Colour Control

The 12 A-RGB LEDs installed in the BioniX P120 A-RGB are autonomously controllable. The BioniX P120 A-RGB is compatible with the common A-RGB standards of leading motherboard manufacturers for the simplest possible use. It can therefore be fully illuminated directly via the A-RGB motherboard connection or an external controller and synchronized with another hardware lighting.

Easy Installation and Extension via Daisy Chain

The ARCTIC BioniX P120 A-RGB has a modular cable management and uses two connections: a power-in and a connector output. ARCTIC uses a 7-pin connector for this, which forwards both the fan and lighting signals and considerably simplifies the cabling *. The included connector block also enables a wireless series connection.

* All necessary cables are included.

High-Quality Plain Bearing

Thanks to an alloy/lubricant combination developed in Germany, friction within the bearing is reduced, increasing efficiency. In this way, less heat is generated, there is less bearing noise and the service life of the fan is extended.

Optimised for Static Pressure

With the BioniX P120 A-RGB, as with the entire P-series, special emphasis was placed on a focused airflow and high static pressure. The fan guarantees extremely efficient cooling, even with increased air resistance.

This makes the BioniX P120 A-RGB particularly suitable for use on covered case vents or inlets with filters.

Maximum Smoothness, Minimum Vibration

The operating noise of the newly developed ARCTIC motor is barely noticeable even at the lowest speed. Thanks to sinus magnetization, the P-Fan motor generates only 5% of the commutation vibrations of a conventional DC motor. In addition, the ARCTIC BioniX P120 A-RGB has rubber pads on its contact surfaces for further decoupling.

400 to 2300 rpm Regulated via PWM

With a wide speed range and connector functionality, the fan speed of the BioniX P120 A-RGB can be controlled synchronously with other fans. This reduces the noise development to a minimum while at the same time guaranteeing maximum cooling performance. 

Available as a Bundle or Individually

The BioniX P120 A-RGB is available as Singe Case Fan or in a Bundle, including three BioniX P120 A-RGB and ARCTICs A-RGB Controller.

Quality You Can Rely On

To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how to improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality but also durability. It's a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee on the BioniX P120 A-RGB.

Youtube-Icon

Product Video


Technical specifications & manual

Performance
Fan Speed:
400—2300 rpm
Airflow:
48 cfm | 81.55 m³/h
Static Pressure:
2.1 mmH2O
Noise Level:
0.45 Sone
Fan
Fan Frame:
BioniX
Control Type:
PWM PST
Connector:
7-Pin-Connector
Fan Bearing:
Fluid Dynamic Bearing
Operating Ambient Temperature:
0—40 °C
Warranty:
6 Years
Electric Characteristics
Typical Voltage:
12 V DC
Starting Voltage:
5 V
Current | Voltage:
0.13 A | 12 V
Cable Length:
400 mm
Size & Weight
Length:
120 mm
Width:
120 mm
Height:
30 mm
Weight:
209 g
  • Width: 125 mm
  • Height: 34 mm
  • Length: 161 mm
  • Weight: 0.259 kg

Product gallery

€25.99

Prices incl. VAT exl. shipping costs
Delivery time

Spare Parts

BioniX P120 A-RGB Interconnection Cable
60 mm cable to connect two BioniX P120 A-RGB with each other

€5.99

Prices incl. VAT exl. shipping costs

Our
Support

Do you need help or product advice?

Our competent customer service is at your side with questions about our products, spare parts and in case of complaints. Support