Pourquoi et comment désactiver Adblocks uniquement pour cowcotland.com ?

Derniers tests :

Dernières vidéos :

Ca c'est du ventilo !!

Nos confrères de BigBruin nous proposent le test d'un ventilateur de 80mm d'un constructeur malheureusement pas importé en france : Acouti Products.

Vous allez me dire : "Ouai, bah c'est un ventilo, quoi, pas de quoi casser 3 pattes à un canard ..." Et ben je ne suis pas du tout d'accord car les caractéristiques annoncées en font un excellent ventilateur :

Product Code (AFDP - )	8025B
Fan Dimensions mm	80x80x25
Fan Start at 5V DC?	Yes
Connector Type	3-pin (from m'board), OR 4-pin (from PSU) using 3-Speed Fan Cable
Life Expectancy (at 25°C)	60,000hrs (6.85yrs)
Included Accessories	3-Speed Fan Cable, 4 x Tie Wraps & 4 x Screws
Full Speed (12VDC)
Air Volume Throughput CFM ±10%	19.9
Acoustic Performance (DIN45635 @1m) dBA	15.6
Fan Speed RPM** ±10%	1,600
Medium Speed (approx. 7.5VDC)
Air Volume Throughput CFM ±10%	11.7
Acoustic Performance (DIN45635 @1m) dBA	<10*
Fan Speed RPM** ±10%	1,000
Low Speed (5VDC)
Air Volume Throughput CFM ±10%	5.7
Acoustic Performance (DIN45635 @1m) dBA	<10*
Fan Speed RPM** ±10%	500
Fan Housing Material	Black Glass Filled PBT
Fan Weight g	86
Packaged Weight g	127
Connector Wire Length	40cm +/-10%
Operating Temperature Range	(-)10 - (+)70°C
Motor Bearing Type	Double Ball Bearing
Operational Voltage	5 - 12 VDC
Rated Current A (at 12VDC)	0.08
Rated Power W (at 12VDC)	0.96
Fan Safety Approval	CE (Electromagnetic Compatibility EN 6100-6-3 & 6100-6-1:2001)
Motor Protection	Polarity Protection Locked Rotor Protection Auto Restart***
NOTES: * Where noise levels have been measured & calculated @1m distance below 10dBA we have quoted <10dBA. Very low noise levels, are taken at 0.3m distance and extrapolated to 1m, so that recorded levels are significantly above test chamber background noise levels. The quoted RPM for an individual fan may vary slightly by as much as 10% (figures shown are averages from multiple tests). A variation in RPM at a given voltage will result in a change in airflow and noise levels. * Auto-restart is a safety feature build into the fan's PCB that automatically restarts the fan after the release of a constraint that has prevented the blades from spinning.